KENWOOD NX-5700/5800/5900
NX-5700/5800/5900
VHF/UHF/700-800 MHz
- Multi-Digital Operation in two of NXDN, DMR & P25 (Phase 1 & 2)
- NXDN Conventional and Type-C & Gen2 Trunking
- S-Trunking
- DMR Tier III Trunking
- DMR Tier II conventional
- DMR Auto Slot Select
- Site Roaming
- Mixed Digital & FM Analog Operation
- Large, Color 2.55″ (154 x 422 pixels) TFT Display
- Multiple Configuration Optionally available:
Dual Remote Control Head
Multi-Band (Multi RF Deck) Control
Mobile Relay Station - Built-in GPS Receiver (Requires KRA-40G GPS active antenna)
- Built-in Bluetooth
- Built-in 56-bit DES & Optional 256-bit AES Encryption (NXDN & P25)
- 5-tone Signaling
- microSD/microSDHC Memory Card Slot
- IP54/55 and MIL-STD-810 C/D/E/F/G
PRODUCT HIGHLIGHTS
• Multi-Digital operation in NXDN, DMR and P25 (Phases 1 & 2) protocols
• Any combination of two digital protocols can be selected from NXDN, DMR, and P25
• Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
• Large, Color 2.55″ (154 x 422 pixels) TFT Display for at-a-glance operational status checking
• Easy to follow GUI and Multi-line Text to convey more information
• Dual Remote Control Head and Multi-Band (Multi RF Deck) Control Option providing scalable configurations for various operations and applications
• Built-In GPS Receiver with Optional GPS Active Antenna (KRA-40G) for effective fleet management
• Bluetooth® Module built-in for hands-free operation
• Renowned KENWOOD Audio Quality can be achieved with Active Noise Reduction (ANR) that utilizes built-in DSP for suppression of ambient noise
• Built-in 56-bit DES Encryption
• Optional 256-bit AES Encryption
• microSD/SDHC (up to 2GB/32GB) Memory Card Slot
• IP54/55 and MIL-STD-810 C/D/E/F/G
GENERAL FEATURES
• 50 W to 5 W (136-174 MHz) Model
• 45 W to 5 W (380-470, 450-520 MHz) Model
• 30 W to 2 W (700 MHz) Model / 35 W to 2 W (800 MHz) Model
• Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
• DB-25 Accessory Connector
• AMBE+2™ Enhanced Vocoder
• 4 W Speaker Audio
DIGITAL – NXDN MODE
• Gen2 & NXDN Type-C Trunked Operation
• NXDN Conventional Operation
• 6.25 & 12.5 kHz Channel Spacing
• Over-the-Air Alias
• Over-the-Air Programming
• Paging Call
• Emergency Call
• All Group Call
• Status Messaging
• Remote Stun/Kill
• Remote Check
• Short & Long Data Messages
• NXDN Digital Scrambler Included
DIGITAL – DMR MODE
• S-Trunking
• DMR Tier III Trunking
• DMR Tier II Conventional
• DMR Auto Slot Select
• Site Roaming
• Two-slot TDMA in 12.5kHz channels
• Call Interruption
• Dual-slot Direct Mode
• Energy Efficient
DIGITAL – P25 MODE
• P25 Phase 1 Conventional/Trunked Operation
• P25 Phase 2 Trunked Operation
• Talk Group ID Lists
• Individual ID Lists
• Caller ID Display
• Remote Monitor/Remote Check
• Radio Inhibit
• Encryption Key Zeroize & Retention
• P25 Over-the-Air Re-keying
• P25 Over-the-Air Programming
ANALOG – FM MODE
• Conventional & LTR Zones
• FleetSync®/II: PTT ID ANI / Caller ID Display, Selective / Group Call, Emergency Status / Text Messages
• MDC-1200: PTT ID ANI / Caller ID Display, Emergency, Radio Check / Inhibit
• QT / DQT, 2-Tone & 5-Tone
• Built-in Voice Inversion Scrambler
MULTIPLE CONFIGURATIONS
The NX-5000 mobile series allows users to create a variety of configurations to suit different requirements by combining different options.
Some of the standard configurations are:
• Single Remote Control Head x Single RF Deck
• Dual Remote Control Heads x Single RF Deck
• Dual Remote Control Heads x Multi RF Decks